Pt nanohelices with highly ordered horizontal pore channels as enhanced photothermal materials

Recent studies have further demonstrated that the conjugation of noble metal helical nanostructures could alter their optical and catalytic activities. However, the intrinsic isotropic crystal growth of Pt makes the synthesis of high-quality Pt NCs with unique porous or branched nanostructures difficult. In this work, a new, powerful capping agent, N,N-dimethyloctadecylammonium bromide acetate sodium, was synthesized and used to coordinate Pt ions, slowing down the reaction rate. As a result, in aqueous solution, Pt nanohelices with highly ordered horizontal pore channels were successfully fabricated. Importantly, the Pt nanohelices were composed of several sub-2 nm Pt nanowires coiled together around a central point. The as-obtained samples exhibited enhanced photothermal properties compared with the classic Pt nanoparticles.     

On the low-temperature chemistry of 1,3-butadiene

In this paper, species versus temperature profiles were measured during the oxidation of 1,3-butadiene in a jet-stirred reactor (JSR) at 1 atm, at different equivalence ratios (φ = 0.5, 1.0 and 2.0), in the temperature range 600 – 1020 K. Both synchrotron vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) and gas chromatography (GC) methods were used to analyze the species. The experimental results show that a large proportion of the products are aldehydes (formaldehyde, acetaldehyde, acrolein, etc.) and ketenes (ketene, methyl-ketene), with acrolein being one of the major products. Moreover, furan, 1,3-cyclopentadiene and benzene are also present as intermediates in significant amounts. The reaction pathways leading to the formation of these species are discussed in detail. A new detailed mechanism, NUIGMech1.3, was developed to simulate these new data as well as other experimental data available in the literature. The validation results indicate that quantum calculations are also needed to explore the formation of some important species formed in the oxidation of 1,3-butadiene. Overall, the new 1,3-butadiene mechanism agrees well with various experimental data in the low- to high-temperature regimes and at different pressures. Flux and sensitivity analyses show that 1,3-butadiene shares some common reaction chemistry pathways with 1- and 2-butene via Ḣ atom and HȮ₂ radical addition to the C = C double bond in 1,3-butadiene, reactions which are important for both systems. The low temperature chemistry of 1,3-butadiene is mainly controlled by the reaction pathways of ȮH radical addition to the C = C double bond of the fuel molecule. The 1-buten-4-ol-3-yl radicals so formed subsequently add to O₂ and react via the Waddington mechanism, which is important in accurately simulating the oxidation and auto-ignition of 1,3-butadiene at engine relevant conditions.     

Interfacial synthesis of crystalline quasi-two-dimensional polyaniline thin films for high-performance flexible on-chip micro-supercapacitors

Quasi-two-dimensional (q2D) conducting polymer thin film synergizes the advantageous features of long-range molecular ordering and high intrinsic conductivity, which are promising for flexible thin film-based micro-supercapacitors (MSCs). Herein, we present the high-performance flexible MSCs based on highly ordered quasi-two-dimensional polyaniline (q2D-PANI) thin film using surfactant monolayer assisted interfacial synthesis (SMAIS). Owing to high electrical conductivity, rich redox chemistry, and thin-film morphology, the q2D-PANI MSCs show high volumetric specific capacitance (ca. 360 F/cm³) and energy density (17.9 mWh/cm³), which outperform the state-of-art PANI thin-film based MSCs and promise for future flexible electronics.     

Phase-mediated cobalt phosphide with unique core-shell architecture serving as efficient and bifunctional electrocatalyst for hydrogen evolution and oxygen reduction reaction

Hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) have been considered as two critical processes in the field of electrocatalytic water-splitting for hydrogen production and fuel cells. However, the sluggish reaction kinetics of HER and ORR required efficient electrocatalyst such as Pt to promote such process. Transition metal phosphides (TMPs) exhibit great potential to replace noble metal electrocatalysts to accelerate HER and ORR due to their high activity and easy availability. Herein, a highly-efficient bifunctional CoP electrocatalyst for HER and ORR, featuring a unique core-shell structure decorated on nitrogen-doped carbon matrix was designed and constructed via etching a cobalt-based zeolitic imidazolate framework (ZIF-67) with phytic acid (PA) followed by pyrolysis treatment (PA-ZIF-67–900). Experimental results revealed that the pure-phase single-crystalline CoP exhibited outstanding electrocatalytic performance in HER and ORR, superior to Co(PO₃)₂ in PA-ZIF-67–700, hybrid phase of Co(PO₃)₂ and CoP in PA-ZIF-67–800 and Co₂P-doped CoP in PA-ZIF-67–1000. To reach the current density of 10 mA/cm² the as-synthesized CoP required an overpotential of 120 mV for HER in 1 mol/L KOH and half-wave potential of 0.85 V in O₂-saturated 0.1 mol/L KOH. This work present new clue for construction of efficient and bifunctional electrocatalyst in the field of energy conversion and storage     

Preparation of electrically enhanced forward osmosis (FO) membrane by two-dimensional MXenes for organic fouling mitigation

In this work, a conductive thin film composite forward osmosis (TFC-FO) membrane was firstly prepared via vacuum filtering MXenes nanolayer on the outer surface of polyethersulfone membrane followed by interfacial polymerization in the other side. Moreover, its feasibility of mitigating organic fouling under electric field was evaluated. Results indicated that the addition of MXenes greatly reduced the electric resistance of membrane from 2.1 × 10¹² Ω to 46.8 Ω, enhanced the membrane porosity and promoted the membrane performance in terms of the ratio of water flux to reverse salt flux. The modified TFC-FO membrane presented the optimal performance with 0.47 g/m² loading amount of MXenes. Organic fouling experiments using sodium alginate (SA) and bovine serum albumin (BSA) as representative demonstrated that the introduction of MXenes could effectively enhance the anti-fouling ability of TFC-FO membrane under the electric field of 2 V. The interelectron repulsion hindered organic foulants attaching into membrane surface and thus effectively alleviated the membrane fouling. More importantly, the modified TFC-FO membrane showed good stability during the fouling experiment of 10 h. In all, our work proved that introducing MXenes into the porous layer of support is feasible to alleviate organic fouling of FO membrane.     

A stable chemiluminophore,adamantylideneadamantane 1,2-dioxetane: from fundamental properties to utilities in mechanochemistry and soft crystal science

Chemiluminescence (CL) is a luminescence phenomenon originated by a “chemical reaction.” CL provides a basis for real-time imaging technology in materials science. In fact, a CL reaction is easily triggered in general and makes it possible to track its progress in a target material by highly sensitive photon detection. Recently, real-time CL imagings became breakthrough techniques for analyzing the molecular mechanisms of failures of polymeric materials and of reactions and phase transitions in soft crystals. In the CL imaging techniques, adamantylideneadamantane 1,2-dioxetane (Adox) has been adopted as a stable core structure of chemiluminophores. That is, Adox is an essential seed compound to design a chemiluminophore with a desired molecular function. To support developments of real-time CL imaging techniques, we review the chemistry of Adox as a representative stable chemiluminophore including scientific history and utilities of Adox and its derivatives.     

Salt spray corrosion behavior and pitting resistance of Ti-15 V-3Cr-3Al-3Sn alloy evaluated using XPS,SKPFM, and electrochemical technique

Journal of Solid State Electrochemistry - As a promising material for many industrial applications, Ti-15 V-3Cr-3Al-3Sn (commonly referred to as Ti-15–3) titanium alloy always...     

Reversal of circularly polarized luminescence direction and an “on-off” switch driven by exchange between UV light irradiation and the applied direct current electric field

Science China Chemistry - We report the rational design of a dual stimulus-activated quaternary chiral emission nematic liquid crystals (Q-N*-LCs) containing light-driven chiral dopant R-S-R-1, a...     

Efficient separation of Cinnamomum camphora leaf essential oil and in vitro evaluation of its antifungal activity

Cinnamomum camphora leaf essential oil (CEO) was extracted using enzymatic-ultrasound pretreatment followed by microwave assisted extraction (EUP-MAE) method and simultaneously studied as a mycelial growth inhibitor against five important pathogens which cause potato dry rot. The optimum EUP-MAE conditions with a real CEO yield of 19.23 ± 0.12 mg/g were obtained through Plackett–Burman design and Box–Behnken design as follows: 3 % of enzyme dosage, 2 h of pretreatment time, 5 of pH, 210 W of ultrasound power, 50 °C pretreatment temperature, 16 mL/g of water to solid ratio, 30 min of microwave time and 500 W of microwave power. Compared to the reference methods, EUP-MAE possessed a highest CEO yield than these of ultrasound-microwave assisted extraction (U-MAE) and traditional hydrodistillation (HD). Gas chromatography-mass spectrometry (GC–MS) analysis demonstrated that eucalyptol, camphor, and α-terpineol were the three main constituents of CEO. Results from in vitro antifungal activity assay revealed that the mycelial growths of all the five tested Fusarium solani, Fusarium culmorum, Fusarium trichothecioides, Fusarium sporotrioides, and Fusarium avenaceum were apparently affected by CEO. These findings not only provide a potential paradigm for the separation of plant essential oil, but also guarantee a promising utilization of the CEO for potato protection to control the Fusarium spp.